Lowering Devices & Accessories

The rescue figure of 8 devices have extended side bars to keep the rope in place, preventing the rope from creeping inwards and causing unwanted locking.

The Invert-A-Wrap is a cost-effective rope friction device designed for lowering timber/objects from an elevated position in a controlled manner. The user-friendly design can be mounted in either orientation and allows for a Stein Hauler Kit to be attached so loads can either be raised prior to lowering or to assist in pre-tensioning the rigging line.

The Invert-A-Wrap is a cost-effective rope friction device designed for lowering timber/objects from an elevated position in a controlled manner. The user-friendly design can be mounted in either orientation and allows for a Stein Hauler Kit to be attached so loads can either be raised prior to lowering or to assist in pre-tensioning the rigging line.

Stein LD750 Invert-A-Wrap floating lowering device 750kg WLL

Stein RC1000 floating lowering device 1000kg WLL

Stein RC2001 fixed lowering device 2000kg WLL

The Stein RC-3100 pre-tension pulley has been designed to work in conjunction with the range of Stein RC lowering devices.

Stein RCP5000 10 ton ratchet handle with 20cm tail. For use with Stein RC lowering devices.

5.8m Stein webbing with inverted hook. For use with Stein RC lowering devices.

7.8m Stein webbing with inverted hook. For use with Stein RC lowering devices.

Stein RCP5100 5 ton ratchet handle with 20cm tail. For use with Stein RC lowering devices.

4.8m Stein webbing with inverted hook to fit Stein RC2001.

Stein RCP6004 top mounting strap for RC lowering devices.

The Stein RCW-3001 has a large diameter drum that easily accommodates working lines up to 19mm and has a working load limit of up to 3000kg (subject to mounting type).

The Stein RCW-3002 is a power-house of lowering devices, the large diameter drums easily accommodate working lines up to 19mm and has a working load limit of up to 6614lbs / 3000kg (combined subject to mounting type).

The Stein RCWINCH is a rugged constructed brake winch designed to work in conjunction with the RCW3001 bollard lowering device.