The stylish design of the Stein Vega Plus work positioning harness offers durability, ergonomic comfort and practicality all in one. Fitted with fully adjustable quick release waist and leg loops and a replaceable bridge the Vega Plus ticks all the right boxes. Available in Size 1, Size 2 and Size 3.
The new “U-Create” gear loop system allows you to personalise the harness tool loops to suit your climbing needs. The durable yet light weight design of the Vega Plus ensures the harness will meet the demands of tree climbers everywhere.
Large semi-rigid leg loops have been specially designed to mould around the leg for increased support for prolonged climbing. Stiffened inserts which can be removed if required. The Vega Plus has attachment points to allow the attachment of a top harness.
Size 1: Waist size 76-82cm
Size 2: Waist size 82-90cm
Size 3: Waist size 90-96cm
The Stein Vega Plus is supplied with the following items for the “U-Create” gear loop system:
1 x 2000mm of 7mm accessory cord Black
5 x Protection Tubes
1 x Stein CB Anchor
8 x Webbing Protection Rubbers
For user safety it is imperative to select the correct size of harness. Side attachment points (Dees) should ideally position just forward of the ASIS on the hip bone. Whilst testing the harness the users should select a suitable anchor point and using the forward attachment points (bridge ring) load the harness in both work position and suspension stances to ensure correct fit and support can be achieved. Side attachment points (Dees) on harnesses are designed for support and should not be used for unassisted suspension. These can be tested by attaching a suitable anchor to either side attachment points (Dee) and leaning back in to the harness from a standing position.
© 2019 GEORGE CARR & SONS (SAWS) LIMITED. All Rights Reserved. VAT No. 137 647 056
A secure site by Somersetdesign